New Products 2020 Q3 

POWER DISTRIBUTION MODULE 
14 OUTPUTS (EXPANDABLE TO 31 OUTPUTS)

Extremely compact all-in-one power switching and circuit protection solution provides three (3) configurable output groups each programmable to be either 24/7, ignition switched on/off, or time delayed off. Seven ground return screws can support up to fourteen (14) wires. Ten (10) outputs @ 1-25 Amp, Three(3) outputs @ 1-45 Amp. LEDs for each output indicate off, on, fuse blown, over/under voltage, and over-temperature. Optional integrated mechanical kill switch eliminates need for breakers when power fed by OEM fuses.

    PDM-14 w/KILL SWITCH      PDM-14 w/o kill switch            

HIGH-AMP CIRCUIT BREAKERS  
AUTOMOTIVE /  MARINE RATED 

Designed for high temperature engine compartment applications and fully waterproof. Surface mount 50 - 250 Amp models. Panel mount 50 - 150 Amp models. Manual on / off controls via push button and trip re-set levels. Ignition protected, safe for installation in enclosed spaces where explosive gases may be present. Unique high switching cycle design provides 6,000+ operations and up to 72 Vdc application support. All stainless steel self-locking hardware and integrated terminal stud insulators.

MORE INFO ON CIRCUIT PROTECTION PAGE

New Products 2020 Q2 

DUAL / TRIPLE BATTERY ACRs 
(AUTOMATIC CHARGING RELAYS)

Designed for harsh environments with three control wire connection options including Deutsch DT/AT connectors. The family includes a 160 Amp Dual Battery ACR or a Triple Battery 2x80 Amp ACR, both available in either 12 or 24 volt models. Both products deliver a wide range of functionality improvements beyond current industry solutions, including adjustable connect and disconnect voltage set points, dual engine compatibility, and remote relay expansion capability.

    12V DUAL      12V triple      24V DUAL      24V TRIPLE

BR SERIES  
SEALED DISTRIBUTION BLOCKS

Sealed blocks with 12 Position MX-150 integrated connector provide several variations of connection between wires, each with a high power M6 I/O terminal stud connected to one of the terminal groups. Eliminates unreliable butt splice connections, simplifies connecting more than 2 wires, and provides combination solutions that allow signal interconnection with ground return collection. 150 Amps max rating on M6 I/O terminal.

MORE INFO ON DISTRIBUTION PRODUCTS PAGE

TH Series Universal Voltage Sensing
Relay w/Time Delay

learn more

Shutoff Switch for
TH Series Relays 

LEARN MORE

150 A Relay with
Metripak Connector

LEARN MORE

Advanced Gun Lock Timer
w/Release Lockout 

LEARN MORE


TH SERIES SEALED  RELAYS
1x 160 Amp or 2x 80 Amp, Optional DT/AT Connector

Designed for harsh environments with two standard control connection options (sealed MX-150 or flying wire leads) and optional Deutsch DT/AT harness termination part numbers. Fully sealed enclosure and control connection options, all stainless steel self-locking hardware and tin plated copper conductors. Use for extending current capability or number of independent outputs for TH Series Time Delay Relays (TDRs) or Automatic Charging Relays (ACRs), or connect to external manual (switch) or automatic (ignition) signal.

MORE INFO ON RELAYS PAGE



SUBSCRIBE BELOW FOR NEW PRODUCT ANNOUNCEMENTS AND APPLICATION NOTES

Subscribe Thanks
Thanks for your subscription!